Toggle alarm notifications on/off. Setpoint thresholds are configured in the Settings tab.
Call List
Enter 10-digit numbers. +1 country code is added automatically. Calls go in order 1 → 5.
Test Alarm Call
Send a live test call to verify the alarm system.
+1
Note: there may be a brief pause before the message plays.
Station setpoints. Changes are published to MQTT with retain and delivered to PLCs on save.
North Tower / Booster
Booster Start Level
Start pumps when tower drops below
ft
Booster Stop Level
Stop pumps when tower rises above
ft
N Tower High Level Alarm
Alert when N Tower rises above
ft
N Tower Low Level Alarm
Alert when N Tower drops below
ft
High PSI Limit
Discharge overpressure shutdown
psi
Low PSI Limit
Low discharge pressure alarm
psi
South Tower
High Level Alarm
Alert when level rises above
ft
Low Level Alarm
Alert when level drops below
ft
East Well (Well 4)
Fill Start Level
Start when S.Tower drops below
ft
Fill Stop Level
Stop when S.Tower rises above
ft
High PSI Limit
psi
Low PSI Limit
psi
West Well (Well 5)
Fill Start Level
Start when S.Tower drops below
ft
Fill Stop Level
Stop when S.Tower rises above
ft
High PSI Limit
psi
Low PSI Limit
psi
✓ Setpoints published to MQTT
DEVICE MANAGEMENT
Toggle devices active/inactive. Inactive devices will not trigger alarm calls.
✓ Saved
Test Alarm Call
Send a live test alarm call through the Twilio system to any phone number.
Phone Number
+1
What to expect
• Call arrives within 30 seconds
• Press 1 to acknowledge and stop the call
• If unanswered, no cascade — test calls go to one number only Note: there may be a brief pause before the message plays.
